#!<< 220' X 2MM Tab wire + 1 Flux Pen Kester for Do It Yourself Solar cells Panel

#!<< 220' X 2MM Tab wire + 1 Flux Pen Kester for Do It Yourself Solar cells Panel

Find recommendations and reviews 220' X 2MM Tab wire + 1 Flux Pen Kester for Do It Yourself Solar cells Panel. For both price and quality. To help you make the best product.
This lot contains KIT TO MAKE SOLAR PANEL: 220' of Tab (tabbing) Wire FOR Solar Cells WOW x2mm width! for 220 Evergreen 3"x6" cells or 110 6"x6" GAUGE: 0,1000MM WIDTH: 2,0000MM MATERIAL: 62SN/36PB/2AG TINNED COPPER US SIZE: 0.0039" X 0.0787" SOLDER COATING THICKNESS: 414-600 MICRO INCHES/SIDE Many sellers on eBay will offer you TAB wire - please make sure: 1. The wire is Solder covered for main 2 reasons: ~ solder protects the surface of the copper from oxidation and ~ provides a layer of solder to form a solder joint ( no solder needed !! - no mess, no stress ) 2. The widest TAB wire you can get ( we sell ONLY 2mm ) the best for your project!: ~ easy to work with, ~ wire will provide best conduction 1 Kester Rosin Pen Flux Dispensing Pen#186 ( non-conductive, non-corrosive and do not require removal in most applications ) We buy DIRECTLY from Kester - if you decide to get CHEAPER Flux from other countries - PLEASE REMEMBER - this is liquid that CONTAINS ACID! A$2-$3 cheaper purchase may DESTROY your entire project in just a couple of months because the acid continues to eat away at the cell unless you neutralize it..... (Kester's Flux pens do not require removal/neutralization after application)

Feature About 220' X 2MM Tab wire + 1 Flux Pen Kester for Do It Yourself Solar cells Panel :

• -

(Full Description)

#!<< 80' Solar Tabbing Wire 8' Bus Wire, Flux Pen, 2 Diodes

#!<< 80' Solar Tabbing Wire 8' Bus Wire, Flux Pen, 2 Diodes

Find recommendations and reviews 80' Solar Tabbing Wire 8' Bus Wire, Flux Pen, 2 Diodes. For both price and quality. To help you make the best product.
For sale are 80' Solar Cell Tabbing Wire, 8' Solar Cell Bus Wire, Solar Flux Pen, and 2 Solar Panel Diode. This Item Includes - 80' Tabbing Wire: The exact same as the leading solar panel makers use with solder on the wire. This is one 'thin' spool so there are no kinks or twists, just straight wire. This tabbing comes off easy and never gets caught. - 8' Bus Wire: The exact same as the leading solar panel makers use. - 1 Flux Pen: Kester 186 Flux Pen - Not the cheap flux pen or the fake Chinese made ones. - 2 Diode: 6Amp Axial Type From ML SOLAR

Feature About 80' Solar Tabbing Wire 8' Bus Wire, Flux Pen, 2 Diodes :

• -

(Full Description)

#!<< 40' Solar Tabbing Wire 4' Bus Wire, Flux Pen, Diode NEW

#!<< 40' Solar Tabbing Wire 4' Bus Wire, Flux Pen, Diode NEW

Find recommendations and reviews 40' Solar Tabbing Wire 4' Bus Wire, Flux Pen, Diode NEW. For both price and quality. To help you make the best product.
For sale are 40' Solar Cell Tabbing Wire, 4' Solar Cell Bus Wire, Solar Flux Pen, and a Solar Panel Diode. This Item Includes - 40' Tabbing Wire ($6 value) The exact same as the leading solar panel makers use with solder on the wire. This is one a 'thin' spool so there is no kinks or twists, just straight wire. This tabbing comes off easy and never gets caught. - 4' Bus Wire ($5 Value) The exact same as the leading solar panel makers use. - 1 Flux Pen ($6 Value) Kester 186 Flux Pen - Not the cheap flux pen or the fake Chinese made ones. - 1 Diode - 6Amp Axial Type ($2.3 Value) by ML SOLAR

Feature About 40' Solar Tabbing Wire 4' Bus Wire, Flux Pen, Diode NEW :

• -

(Full Description)

#!<< Kester 186 Solar Flux Pen for Solar Panel Solar Cell

#!<< Kester 186 Solar Flux Pen for Solar Panel Solar Cell

Find recommendations and reviews Kester 186 Solar Flux Pen for Solar Panel Solar Cell. For both price and quality. To help you make the best product.
This sale is for 1 single pen but we make it easy for you to combine orders and shipping cost stays low. We only sell authentic Kester 186 Solar Cell Flux. Our stock is coming direct from Kester and always "fresh" dated so you can take your time using it. In fact there are counterfeit Kester Pens on the market probably coming in from Asia. They put a bad label on the pen that is not Kester and who knows what is on the inside or when it was really made. USA SELLER

Feature About Kester 186 Solar Flux Pen for Solar Panel Solar Cell :

• -

(Full Description)

#!<< 500' Tabbing Wire 50' Bus Wire and 4 Flux Pens

#!<< 500' Tabbing Wire 50' Bus Wire and 4 Flux Pens

Find recommendations and reviews 500' Tabbing Wire 50' Bus Wire and 4 Flux Pens. For both price and quality. To help you make the best product.
The Leader in DIY Solar Cells, Solar Panels and Components! For sale are 500' Solar Cell Tabbing Wire, 50' Solar Cell Bus Wire, 4 Solar Flux Pens, and 6 Solar Panel Diodes. This Item Includes - 500' Tabbing Wire: The exact same as the leading solar panel makers use with solder on the wire. This is one 'thin' spool so there is no kinks or twists, just straight wire. This tabbing comes off easy and never gets caught. - 50' Bus Wire: The exact same as the leading solar panel makers use. - 4 Flux Pen: Kester 186 Flux Pen - Not the cheap flux pen or the fake Chinese made ones. - 6 Diodes: 6Amp Axial Type

Feature About 500' Tabbing Wire 50' Bus Wire and 4 Flux Pens :

• -

(Full Description)

#!<< MISOL Rosin Flux PEN for DIY Solar cells Panels, for electrical soldering

#!<< MISOL Rosin Flux PEN for DIY Solar cells Panels, for electrical soldering

Find recommendations and reviews MISOL Rosin Flux PEN for DIY Solar cells Panels, for electrical soldering. For both price and quality. To help you make the best product.
This listing includes: 1 pcs of Rosin FLUX PEN for DIY solar cell panel, or soldering of electrical products. Description: No-Clean Flux Net volume: 10ml Shelf life @ 25 cel. degree: 2 year Push the pen tip to start the flux flow keep the pen cap on when not in use. Warning: If touching skin, please wash it timely to avoid to cause the skin irritation Don't eat it. Please put it on the location, where the children can not get it.

Feature About MISOL Rosin Flux PEN for DIY Solar cells Panels, for electrical soldering :

• Net volume: 10ml
• Push the pen tip to start the flux flow keep the pen cap on when not in use.
• No-Clean Flux
• Shelf life @ 25 cel.degree: 2 year
• Warning: If touching skin, please wash it timely to avoid to cause the skin irritation Don't eat it. Please put it on the location, where the children can not get it.

(Full Description)

#!<< 500ft Tabbing Wire 50ft Bus Wire 3 Flux Pens 6- 15amp Diodes for DIY Solar Panel

#!<< 500ft Tabbing Wire 50ft Bus Wire 3 Flux Pens 6- 15amp Diodes for DIY Solar Panel

Find recommendations and reviews 500ft Tabbing Wire 50ft Bus Wire 3 Flux Pens 6- 15amp Diodes for DIY Solar Panel. For both price and quality. To help you make the best product.
Due to popular demand, we are making our Tabbing Wire, Bus Wire(or Tabbing Ribbon and Bus Ribbon), Rosin Flux Pen and 15amp Diode that are part of our solar cells kit available for purchase individually for DIY solar panel makers. This listing contains 500 feet tabbing wire, 50 feet bus wire, 3 Rosin Flux Pen and 6- 15amp Diode. Item details: This tabbing wire is perfect for the Do It Yourselfer building your own solar modules. *Tabbing Wire Specification: Size: 0.2mm x 1.6mm (thickness x width) Solder Thickness: 0.05 +/- 0.01mm Solder Type: 60/40 (sn/pb) *Bus Wire Specification: Size: 0.2mm x 5mm (thickness x width) Solder Thickness: 0.05 +/- 0.01mm Solder Type: 60/40 (sn/pb) *Flux Pen Specification: Rosin flux is a chemical cleaning agent that facilitates soldering, and it's in a very user friendly pen format for easy application onto our solar cells's bus bars and tabbing wires. Always apply flux on the bus bars or wires first before soldering, and the bonding job will be easy. It works great with our solar cells. Superior fluxing ability Instant wetting After soldering, the rosin residue is non-corrosive, non-conducting, moisture resistant, and fungus resistant Meets Mil. spec. #RA 14256 ANSI Spec. 004 ROMI class, J Standard How to use the flux pen: The tip of the flux pen is dry when new. There is a seal inside the flux that you need to break before the flux liquid will moist the tip. To break the seal, point the flux pen upward, and depress the tip into the shaft of the pen. The tip will spring back to its original position. Wait for a few minutes then the tip will be moister and ready for use. *Diode Specifications: 15amp diode made by No.1 diodes manufacturer! Voltage Range: 45 Volts Current: 15.0 Amperes

Feature About 500ft Tabbing Wire 50ft Bus Wire 3 Flux Pens 6- 15amp Diodes for DIY Solar Panel :

(Full Description)

#!<< 1 KW 3x6 Untabbed Solar Cells DIY Panel Kit +Extra Flux Pens NEW TECHNOLOGY CELL

#!<< 1 KW 3x6 Untabbed Solar Cells DIY Panel Kit +Extra Flux Pens NEW TECHNOLOGY CELL

Find recommendations and reviews 1 KW 3x6 Untabbed Solar Cells DIY Panel Kit +Extra Flux Pens NEW TECHNOLOGY CELL. For both price and quality. To help you make the best product.
1KW 3x6 Untabbed Solar Cells for DIY Solar Panel Manufacturing NEW TECHNOLOGY Cells with Wires and Extra Flux Pens (3 flux pens) The following is a little more details regarding this listing: I. Cells: 550 pcs plus some bonus cells The standard cell specifications are the following, though the individual cells can be above or below these standards. Cell Specifications: Average Power (Watts): 1.8 Wp Average Current (Amps): 3.5 Imax Average Voltage (Volts): 0.5 Vmax Thickness 200 ìm = 0.2 mm Exact dimension: 3 1/4 inches x 6 inches, or 80 mm by 150 mm Weight: Just above 6 grams, or 0.2 oz. II: Tabbing wires: 500 feet of tabbing wires to connect the solar cells. Cut them into 6 inch sections to solder onto the bus bars on the cells. III: Bus wires: 50 feet of bus wires. Use them to connect them between the series and connect the tabbing wires ends to the junction box at the back of the panel. IV: Flux: 3 easy-to-use Kester flux pens, MADE IN U.S.A., dispense flux onto the bus bar or your tabbing wires without leaving a mess. It's used to aid soldering and bonding of the wires to the cells. A must-have item.

Feature About 1 KW 3x6 Untabbed Solar Cells DIY Panel Kit +Extra Flux Pens NEW TECHNOLOGY CELL :

(Full Description)

@>> 80 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode

@>> 80 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode

Find recommendations and reviews 80 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode. For both price and quality. To help you make the best product.
For Sale are 80 NEW, solar cells that are 3"x 6" each. PLUS Tabbing, Bus, Flux and a Diode. Great experience to build your own solar panel and save a lot of money.

Feature About 80 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode :

• Plus the 80' interconnect wire, 8' bus, 1 flux pen and 2 diodes
• 80 Prime multi crystal solar cells each with 1.8 watts, 3.6amps

(Full Description)

@>> 108- 3x6 Untabbed Solar Cells DIY Solar Panel Kit w/Wire Flux Diodes

@>> 108- 3x6 Untabbed Solar Cells DIY Solar Panel Kit w/Wire Flux Diodes

Find recommendations and reviews 108- 3x6 Untabbed Solar Cells DIY Solar Panel Kit w/Wire Flux Diodes. For both price and quality. To help you make the best product.
110 pcs 3x6 Multicrystalline Solar Cells DIY Panel Kit Product Details: This set of 3"x6" (80mmX150mm) solar cells are string ribbon multi crystalline cells made by an industry leading solar company that has the smallest carbon foot print - they waste the least silicon in making these cells. The cells are the original factory standard cell size, not other sizes cut by using home made tools which could damage the cells during cutting process. The cells have never been used or soldered, and are not recycled from badly made panels like some factory installed tabbed cells are. There are no tabs on these cells so you can start from scratch and get experience in making solar panels. The following is a little more details regarding this kit: (solar cells, tabbing wires, bus wires, and flux) DIY KIT Technical Data: I. Cells: 110 pieces plus some bonus solar cells The standard cell specifications are the following, though the individual cells can be above or below these standards. Cell Specifications: Average Power (Watts): 1.75Wp Average Current (Amps): 3.5 Imax Average Voltage (Volts): 0.5 Vmax Thickness 200ìm = 0.2 mm Exact Dimension: 3 1/4 inches x 6 inches, or 80 mm by 150 mm Weight: Just above 6 grams or 0.2 oz. II: Tabbing wires: $8 value - 110 feet of tabbing wires to connect the solar cells. Cut them into 6 inch sections to solder onto the bus bars on the cells. III: Bus wires: $6 value - 11 feet of bus wires. Use them to connect them between the series and connect the tabbing wires ends to the junction box at the back of the panel. IV: Flux: $7-$9 value - an easy-to-use flux pen that dispenses flux onto the bus bar or your tabbing wires without leaving a mess. It's used to aid soldering and bonding of the wires to the cells. A must have item. V: Diodes: $4.5 value - 3 diodes rated at 15 amp. Schottky style diodes.

Feature About 108- 3x6 Untabbed Solar Cells DIY Solar Panel Kit w/Wire Flux Diodes :

(Full Description)

@>> 120ft Solar Tabbing Wire 10ft Bus Wire 1 Flux Pen 3- 15amp Diodes for DIY Panel

@>> 120ft Solar Tabbing Wire 10ft Bus Wire 1 Flux Pen 3- 15amp Diodes for DIY Panel

Find recommendations and reviews 120ft Solar Tabbing Wire 10ft Bus Wire 1 Flux Pen 3- 15amp Diodes for DIY Panel. For both price and quality. To help you make the best product.
Due to popular demand, we are making our Tabbing Wire, Bus Wire(or Tabbing Ribbon and Bus Ribbon), Rosin Flux Pen and 15amp Diode that are part of our solar cells kit available for purchase individually for DIY solar panel makers. This listing contains 120 feet tabbing wire, 10 feet bus wire, 1 Rosin Flux Pen and 3 15amp Diode. Item details: This tabbing wire is perfect for the Do It Yourselfer building your own solar modules. *Tabbing Wire Specification: Size: 0.2mm x 1.6mm (thickness x width) Solder Thickness: 0.05 +/- 0.01mm Solder Type: 60/40 (sn/pb) *Bus Wire Specification: Size: 0.2mm x 5mm (thickness x width) Solder Thickness: 0.05 +/- 0.01mm Solder Type: 60/40 (sn/pb) *Flux Pen Specification: Rosin flux is a chemical cleaning agent that facilitates soldering, and it's in a very user friendly pen format for easy application onto our solar cells's bus bars and tabbing wires. Always apply flux on the bus bars or wires first before soldering, and the bonding job will be easy. It works great with our solar cells. Superior fluxing ability Instant wetting After soldering, the rosin residue is non-corrosive, non-conducting, moisture resistant, and fungus resistant Meets Mil. spec. #RA 14256 ANSI Spec. 004 ROMI class, J Standard How to use the flux pen: The tip of the flux pen is dry when new. There is a seal inside the flux that you need to break before the flux liquid will moist the tip. To break the seal, point the flux pen upward, and depress the tip into the shaft of the pen. The tip will spring back to its original position. Wait for a few minutes then the tip will be moister and ready for use. *Diode Specifications: 15amp diode made by No.1 diodes manufacturer! Voltage Range: 45 Volts Current: 15.0 Amperes

Feature About 120ft Solar Tabbing Wire 10ft Bus Wire 1 Flux Pen 3- 15amp Diodes for DIY Panel :

(Full Description)

@>> 500 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, and Flux Pen

@>> 500 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, and Flux Pen

Find recommendations and reviews 500 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, and Flux Pen. For both price and quality. To help you make the best product.
For Sale are 500 NEW, solar cells that are 3"x 6" each. PLUS 500' Tabbing, 50' Bus, 3 Flux pens. Great experience to build your own solar panel and save a lot of money.

Feature About 500 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, and Flux Pen :

• 500 Prime multi crystal solar cells each with 1.8 watts, 3.6amps
• Plus the 500' interconnect wire, 50' bus, 3 flux pens

(Full Description)

@>> 40 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode

@>> 40 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode

Find recommendations and reviews 40 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode. For both price and quality. To help you make the best product.
For Sale are 40 NEW, solar cells that are 3"x 6" each. PLUS Tabbing, Bus, Flux and a Diode. Great experience to build your own solar panel and save a lot of money.

Feature About 40 Prime Solar Cell DIY Kit with Solar Tabbing, Bus, Flux and Diode :

• Plus the interconnect wire, bus, flux pen and diode
• 40 Prime multi crystal solar cells each with 1.8 watts, 3.6amps

(Full Description)

@>> 120' Solar Tabbing Wire 10' Bus Wire, Flux Pen 3 Diodes

@>> 120' Solar Tabbing Wire 10' Bus Wire, Flux Pen 3 Diodes

Find recommendations and reviews 120' Solar Tabbing Wire 10' Bus Wire, Flux Pen 3 Diodes. For both price and quality. To help you make the best product.
For Sale 120' Tabbing Wire and 10' Bus Wire with Solder already on the wire and 1 KESTER #186 Solar Cell Flux Pen, and 3 blocking diodes SPECIFICATION: Tabbing Wire: The exact same as the leading solar panel makers use. This is one a 'thin' spool so there is no kinks or twists. Just straight wire. This tabbing comes off easy and never gets caught. Copper C110 ASTMB 152 soft temper lead free 96.5/3.5 tin-silver .007 X .060" (about 1.5mm wide and 200um thick) Bus Wire: The exact same as the leading solar panel makers ues. Copper C110 ASTMB 152 soft temper lead free 96.5/3.5 tin-silver .007 X .197" (about 5mm wide and 200um thick) Flux Pen: Kester 186 Flux Pen By ML SOLAR

Feature About 120' Solar Tabbing Wire 10' Bus Wire, Flux Pen 3 Diodes :

• -

(Full Description)

#!<< 145 pc Grade A Multi 6x6 Solar Cell DIY Solar Panel Kit w/Wire Flux Diodes 156mm

#!<< 145 pc Grade A Multi 6x6 Solar Cell DIY Solar Panel Kit w/Wire Flux Diodes 156mm

Find recommendations and reviews 145 pc Grade A Multi 6x6 Solar Cell DIY Solar Panel Kit w/Wire Flux Diodes 156mm. For both price and quality. To help you make the best product.
Grade A Multi Crystalline 6x6 Solar Cells DIY Solar Panel Kit We are now bringing to you perfect no breakage 6x6 multi crystalline solar cells that were made in USA. We bought these cells last year intending to use them in our own solar panel production. We have more highest power cells in stock now so we are selling these lower solar cells at bargain prices instead. These solar cells are perfect production solar cells, averaging 3.3 watts or so per cells out of the 150 cells per box. Our sun simulator flash tests show that most are between 3 to 3.5 watt per cells, although some (very small percentage) can be below 3 watts. There are NO cells below 2.43 watts. The typical specifications from our flash testers are the following: Below are the details of this DIY solar panel kit: 1) Solar cells: 145 pcs plus bonus; Technical Data: Power: 2.7w - 3.5 watts Voc (Open Circuit Voltage): 0.60 V - 0.615 V Isc (Close Circuit Current): 6.7 A - 8.08 A Vmp (Max Power Voltage): 0.47 V - 0.487 V Imp (Max Power Current): 5.8 A - 7.18 A 2) Tabbing wires ($45 value) : Additional 440 feet of tabbing wires to connect the solar cells. 3) Bus wires ($10 value): Additional 44 feet of bus wires. Use them to connect them between the series and connect the tabbing wires ends to the junction box at the back of the panel. 4) Flux ($6 value): an easy-to-use flux pen, MADE IN U.S.A., that dispenses flux onto the bus bar or your tabbing wires without leaving a mess. It's used to aid soldering and bonding of the wires to the cells. A must have item. The flux liquid in the pen has a seal. At first use of the brand new flux, remove cap, hold the flux and point the tip upward, press the tip inside a few times so that the liquid can flow to the tip later on. 5) Diodes ($6 value): 4 diodes rated at 15 amp each. Best diodes on the market made by No.1 diodes manufacturer. Schottky style diodes.

Feature About 145 pc Grade A Multi 6x6 Solar Cell DIY Solar Panel Kit w/Wire Flux Diodes 156mm :

(Full Description)

#!<< 100 Multi Solar Cell 6x6 3.9w Each Cell (390w total) with Tabbing, Bus and Flux

#!<< 100 Multi Solar Cell 6x6 3.9w Each Cell (390w total) with Tabbing, Bus and Flux

Find recommendations and reviews 100 Multi Solar Cell 6x6 3.9w Each Cell (390w total) with Tabbing, Bus and Flux. For both price and quality. To help you make the best product.
This Item Includes 100 high power 3 bus bar 6x6 multi solar cells 320' Solar Cell Tabbing Wire 10' Solar Bus Wire 2 Flux Pen For sale 100 6"x6", 3 bus bar multi-crystal solar cells, 320' tabbing, 10' bus, and 2 flux pens. These cells are factory tested (not color matched), binned together and each cell is 3.9 peak watts. This kit is not a mix of high and low power cells like you will see on other sites. The solar panel will be only as good as the lowest power cell. So adding in 1 cell that is 3 watts with 99 more cells that are 4 watt will only give you a 300W panel peak, not 397 watts. Our 6x6 cells have never been tabbed or placed in a panel (no micro-cracks). They are 3 bus bars on each cell to give you the most power in all light conditions compared to cells with 2 bus bars. These are made here at our California production facility. FROM ML SOLAR

Feature About 100 Multi Solar Cell 6x6 3.9w Each Cell (390w total) with Tabbing, Bus and Flux :

• USA Seller ML SOLAR
• Tabbing Wire
• Solar Bus Wire
• Flux Pen
• 6X6 Cells

(Full Description)

#!<< 5 Rosin Flux Pens for Diy Solar Cells Panel

#!<< 5 Rosin Flux Pens for Diy Solar Cells Panel

Find recommendations and reviews 5 Rosin Flux Pens for Diy Solar Cells Panel. For both price and quality. To help you make the best product.
5 Pieces of Rosin Flux Pen for DIY Solar Cells Panel Due to popular demand, we are making our Rosin flux pens that are part of our solar cells kit available for purchase individually for DIY solar panel makers. Rosin flux is a chemical cleaning agent that facilitates soldering, and it's in a very user friendly pen format for easy application onto our solar cells's bus bars and tabbing wires. Always apply flux on the bus bars or wires first before soldering, and the bonding job will be easy. It works great with our solar cells. For precision application of rosin flux, in a convenient microtip pen format. RA type flux. Superior fluxing ability Instant wetting After soldering, the rosin residue is non-corrosive, non-conducting, moisture resistant, and fungus resistant Meets Mil. spec. #RA 14256 ANSI Spec. 004 ROMI class, J Standard How to use the flux pen: The tip of the flux pen is dry when new. There is a seal inside the flux that you need to break before the flux liquid will moist the tip. To break the seal, point the flux pen upward, and depress the tip into the shaft of the pen. The tip will spring back to its original position. Wait for a few minutes then the tip will be moister and ready for use.

Feature About 5 Rosin Flux Pens for Diy Solar Cells Panel :

(Full Description)