#!<< Solar / Wind Turbine AC or DC Current Transducer Hall Effect Sensor to Measure Amps LabVIEW Compatible

#!<< Solar / Wind Turbine AC or DC Current Transducer Hall Effect Sensor to Measure Amps LabVIEW Compatible

Find recommendations and reviews Solar / Wind Turbine AC or DC Current Transducer Hall Effect Sensor to Measure Amps LabVIEW Compatible. For both price and quality. To help you make the best product.
The H­-ACDC-­70 allows you to easily measure current through a wire running from a solar panel, wind turbine, battery charger, fuel cell, pedal power generator, inverter, radio, blender, or paddle wheel. SIZE: 3" x 2" POWER CONSUMPTION: .5 Watts The H-ACDC-70 has an output range compatible with most data loggers like the ones sold by LabJACK, National Instruments, Hobo, dataq, LabJACK, and more. What's in the box: (1) The H-ACDC-70 Sensor, 5 Feet of shielded cable 4 wire 22 AWG, 2.5mm power connector. The output range of this current sensor is shown on the graph in above image. As you can see this current sensor has a linear response. This current sensor will change its output approximately ~0.033V for every Amp of current it detects. When there is no current flowing through the sensor it puts out a default Voltage of 4.0V DC. If the wire you are monitoring has 10 amps flowing through it, then the current sensor will output about 4.330 volts DC. To increase sensitivity simply loop the sensed current path wire through the sensor as many times as needed to increase the gain to the desired level. You will need to first secure the sensor using the four screw holes, and then hook up the green connector to your data logger or your hand held volt meter. Then you will need to pass a single wire through the round doughnut shaped sensor is shown in the picture above. The last step is to provide this sensor with operating voltage through the black power connector (2.5mm). This sensor needs 12V to 30V Volts DC to excite the sensor.

Feature About Solar / Wind Turbine AC or DC Current Transducer Hall Effect Sensor to Measure Amps LabVIEW Compatible :

• Comes with 5 feet of shielded 4 wire cable - size 22 AWG Stranded
• Measure current from solar panel, wind turbine, battery charger,
• Output is compatible with LabVIEW / Labjack / Digital Multi Meter
• Unlike a current shunt, this sensor is electrically isolated from your monitoring system and does not give off heat
• Easy to install, measures up to ±70 Amps DC or AC ( Puts out ~0.033mV per amp per winding through the sensor)

(Full Description)

#!<< HQRP Pair Solar Panel Connector compatible with TYCO for PV / Photovoltaic System plus HQRP Coaster

#!<< HQRP Pair Solar Panel Connector compatible with TYCO for PV / Photovoltaic System plus HQRP Coaster

Find recommendations and reviews HQRP Pair Solar Panel Connector compatible with TYCO for PV / Photovoltaic System plus HQRP Coaster. For both price and quality. To help you make the best product.
HQRP Pair Solar Panel Connectors compatible with TYCO.

Feature About HQRP Pair Solar Panel Connector compatible with TYCO for PV / Photovoltaic System plus HQRP Coaster :

• HQRP® Pair TYCO Bulkhead Connectors / TYCO Panel Connectors plus HQRP® Coaster;
• Contact presistance: <0.3m?; safety class: class II;
• Rate voltage: DC 1000V; Junction temperature current: 25A;
• waterproof grade: IP 65; Cable standard: 2.5/4/6mm2;
• 1 Year warranty!

(Full Description)

@>> Instapark® Mercury 10M Solar Panel Portable Solar Charger with Built-in Dual USB Ports for iPhone, iPad & all other USB Compatible Devices, 5200mAh Battery Pack

@>> Instapark® Mercury 10M Solar Panel Portable Solar Charger with Built-in Dual USB Ports for iPhone, iPad & all other USB Compatible Devices, 5200mAh Battery Pack

Find recommendations and reviews Instapark® Mercury 10M Solar Panel Portable Solar Charger with Built-in Dual USB Ports for iPhone, iPad & all other USB Compatible Devices, 5200mAh Battery Pack. For both price and quality. To help you make the best product.
Converting virtually unlimited supply of solar power to much needed battery juice for your mobile devices such as an iPhone, iPad and many, many more USB portable devices while you are on the go or there is a power outage or disaster strikes, the Instapark Mercury 10 is a light and compact USB solar charging system that easily fits in your purse, messenger bag or backpack. It combines three solar panels totaling 10 watts and folds up into a pack about the same size as a hardcover book, but only thinner and lighter. Unlike most of the solar chargers with unstable circuitry thus requiring a battery pack for power storage and charging external devices, the Mercury 10 are sophisticatedly designed and engineered and comes with dual standard USB ports for directly plugging in the included back-up battery pack, your cell phones including all generations of iPhones, tablet computers including iPad 1 & 2, MP3 players, USB battery/power packs and many other USB compatible mobile devices. Up to two devices can be charged at the same time. For added convenience, a Battery Pack, and a USB charging cable are included for easy power storage ensuring that your indispensable mobile devices will still have their needed power even in adverse weather conditions. Technical Specifications: Power input: 10-watt Mono-crystalline solar panel Power output: 5V Standard USB port x 2 Maximum output current: 2 amp Operating temperature: 32 - 86 F (optimal) Storage temperature: 32 -104 F (optimal) Dimensions: 9 X 6 X 2 inches (folded) 9 x 22 x ½ inches (unfolded) Weight: 12 Oz Warranty: 1-year What's in the box: Instapark Mercury 10 solar charging kit 5200mAh Battery Pack , USB charging cable

Feature About Instapark® Mercury 10M Solar Panel Portable Solar Charger with Built-in Dual USB Ports for iPhone, iPad & all other USB Compatible Devices, 5200mAh Battery Pack :

• Measures only 9 X 6 X 2 inches and weighs less than 1 lb
• 10 Watts high-efficiency mono-crystalline solar panel with foldable design offers excellent portability, ideal for emergency preparedness, backpacking, camping and other outdoor activities
• Built-in dual USB charging ports for directly plugging in iPhone, iPad and other USB compatible mobile devices
• 1-year manufacturer's warranty
• 5200mAh Battery Pack

(Full Description)